- ID solutions
- Products
- Brands
Card technologiesID softwareDocument securityBiometric systemsLoyalty / kiosk
- Sectors
- Service & support
Description
The Sicura laminator from Magicard is an automatic lamination station which applies a tough, 1 mil (0.254mm) thick polyester overlaminate film onto CR80 cards, to extend their life to a minimum of 40,000 swipes. When used in conjunction with most standard card printers, it provides an ideal standalone solution.
Easy to use
An automatic feed is available which incorporates a 100-card hopper (standard CR80 gauge). Alternatively, cards can be fed into the unit manually. The laminate size is approximately 82.5 x 51mm and can be applied to a variety of card thickness from 30 mil to 60 mil. The lamination cycle is around 35 seconds per card.
Secure overlaminates
When laminated at the correct temperature, the overlaminate is virtually impossible to remove without destruction of the card. Overlaminate films can be clear or incorporate anti-copy and tamper-evident security seals, such as Advantage, Ultraviolet and 2D and 3D holograms. Note: to ensure correct adhesion, the clear overlay of the card printer ribbon (the 'O' of the YMCKO) must be omitted.